Pole with curved arm

Poles made of 70 micron hot-dip galvanised EN10025- S235JR in compliance with the UNI EN ISO 1461 (EN40-5) standard.
The poles are subjected to a hot-dip galvanisation process followed by a pre-treatment for removing organic contaminants.
A chemical treatment is then applied to create the correct level of adhesion for the next phase of powder coating followed by a phase of polymerisation in a ventilated oven to ensure the curing process for the paint film is complete.
The treatment and painting cycle guarantees a C4-H durability class in compliance with the UNI EN ISO 12944 standard.
Treatment and paint cycles with a durability class of C5-H are available on request.
Cylindrical shape with a diameter of Ø 159 mm.
70 micron hot-dip galvanised steel anchor plate with 4 slots..
Counterplate and anchoring bolts need to be ordered separately.
Poles with an IP44 flush access cover (310x95mm) are earthed inside.
Class II terminal block with single fuse holder, four poles with three connections each; and 16 mm2 input and 2.5 mm2 output cables to be ordered separately (codes 1863).
Terminal block code 1863 is IP44 | IK08.
Versions including a single or double arm (on opposite sides at 180°). The length of the single arm is L=1250 mm.
The arm is made of S235JR steel and has a diameter of Ø76 mm.
The arms are fixed to the pole with 4 x M10 screws.

Overview